aluminio 6063
A medium-strength 6000-series alloy prized for excellent extrudability, a smooth surface, and strong corrosion resistance. It is the most common alloy for anodized telescopic and pool poles.
best aluminum alloy guide →
Glossary · For OEM & Wholesale Buyers
Aluminum Telescopic Pole Glossary
Plain-language definitions of the alloys, dimensions, lock types, finishes, manufacturing, quality, and trade terms that come up when sourcing aluminum telescopic and pool poles — from Poolpole (Xingyong), a direct factory in Huai'an, Jiangsu, China.
Read the Alloy Guide
Glossary
Aluminum Alloys & Tempers
aluminio 6061
A stronger structural alloy (about 310 MPa tensile) with good corrosion resistance and weldability, used where a pole needs extra strength or stiffness.
Billet
The solid cylindrical aluminum bar that is heated and pushed through a die to form extruded tubes and profiles.
- aluminio 6005
- A medium-to-high-strength 6000-series alloy balancing strength and extrudability, used for sturdier poles and structural profiles.
- aluminio 7075
- A 7000-series alloy with very high strength (about 572 MPa) but lower corrosion resistance and harder extrusion and anodizing; rarely needed for poles.
- Temper (T5 / T6)
- The heat-treatment condition of an alloy. T5 is cooled and artificially aged after extrusion; T6 is solution heat-treated then aged for higher strength.
Glossary
Tube & Pole Dimensions
Espesor de la pared
The thickness of the tube wall, commonly 0.8 to 1.5 mm for poles. It strongly affects strength and weight.
Wall thickness vs strength
For telescopic poles, wall thickness and diameter usually affect rigidity more than the alloy grade itself.
Secciones
The number of nesting tubes in a telescopic pole. More sections add reach but also add joints to lock and align.
- Outer diameter (OD)
- The external diameter of a pole tube. A larger OD increases rigidity and load capacity.
- Inner diameter (ID)
- The internal diameter of a tube. The gap between one section's OD and the next section's ID sets the telescoping fit.
- Longitud colapsada
- The length of a telescopic pole fully retracted. A shorter collapsed length improves carton and container packing density.
- Longitud extendida
- The maximum usable length when the pole is fully opened.
- Tolerancia
- The allowed deviation in a dimension, for example plus or minus 0.05 mm. Tight tolerance gives a smooth slide without wobble.
- Rectitud
- How straight a tube runs along its length. Poor straightness causes binding and a visible bend.
Glossary
Locks & Mechanisms
Flip lock (cam lock)
An external lever clamp that locks sections quickly and holds high loads.
flip-lock poles →
Bloqueo giratorio
An internal expander activated by twisting adjacent sections; simple and low-cost.
twist-lock poles →
Push-button lock
A spring-loaded pin that snaps into pre-set holes to fix the pole at specific lengths.
push-button poles →- Poste telescópico
- A pole made of nested tube sections that slide and lock to adjust length in a single unit.
- Threaded connection
- Screw-together sections used on add-on extension poles for long, static reach.
- End cap / plug
- The fitting that closes a tube end, protects the user, and can carry the lock or an accessory thread.
Glossary
Acabado de superficies
Anodizado
An electrochemical process that grows a hard, corrosion-resistant oxide layer on aluminum, often colored. It is the standard finish for poles.
anodizing service →
chorro de arena
Blasting the surface with abrasive to create a uniform matte texture, often before anodizing.
Recubrimiento en polvo
A dry paint finish applied electrostatically and baked on. It offers many colors but less abrasion resistance than anodizing on sliding poles.
- Hard anodizing
- A thicker, harder anodized layer that adds extra wear and corrosion resistance.
- Coating thickness
- The anodize layer depth, measured in microns. Poles are commonly finished at 12 to 15 microns.
Glossary
Manufacturing & OEM
Extrusión de aluminio
Forcing heated billet through a shaped steel die to produce tubes and profiles.
production capacity →
DFM (Design for Manufacturing)
Reviewing a design for cost-effective, reliable production before tooling is cut.
Fabricante de equipos originales (OEM)
Original Equipment Manufacturer: producing a product to the buyer's own specification.
OEM service →- Press tonnage
- The force rating of an extrusion press, for example 350T to 2000T. Larger profiles require higher tonnage.
- Tooling / die
- The hardened steel die that shapes an extruded profile. Custom shapes need dedicated tooling.
- ODM
- Original Design Manufacturer: the factory designs the product, which the buyer then brands.
- Private label
- Producing goods under the buyer's brand, artwork, and packaging. private label →
- Cantidad mínima de pedido
- Minimum Order Quantity, the smallest order a factory will run, typically 500 to 1,000 units per SKU here.
- Plazo de entrega de la muestra
- The time to make an evaluation sample, about 7 to 10 days for a custom pole.
- Mass-production lead time
- The time to produce a full order after sample approval, about 25 to 35 days.
- Trazabilidad de lotes
- Linking each shipment to its material and production records for quality control and recall management. batch traceability →
Glossary
Quality & Testing
Salt spray test (ASTM B117)
A standardized corrosion test that exposes parts to salt fog for a set number of hours, such as 500 or more.
AQL
Acceptable Quality Limit, the sampling standard used for pre-shipment inspection, for example AQL 1.5.
quality assurance →
IATF 16949
An automotive-grade quality-management standard that signals tight process control.
- Mill certificate (EN 10204)
- A document certifying an alloy's chemical and mechanical properties as supplied by the mill.
- ISO 9001
- The international standard for quality management systems. certifications →
Glossary
Trade, Shipping & Compliance
FOB
Free On Board: the seller delivers goods loaded at the port of origin; the buyer handles main freight onward.
GS1 / UPC barcode
Globally unique retail product barcodes required by most big-box retailers.
amfori BSCI
A widely used social-compliance auditing system for ethical manufacturing.
- Incoterms
- Standardized international trade terms, published by the ICC, that define who pays freight, insurance, and duties.
- CIF
- Cost, Insurance and Freight: the seller covers freight and insurance to the destination port.
- DDP
- Delivered Duty Paid: the seller delivers to the buyer's door with import duties paid.
- 40HQ container
- A 40-foot high-cube ocean container. Collapsed pole length determines how many units fit.
- Country of origin
- The 'Made in' marking required on product and carton for customs and retail compliance.
- Prop 65
- A California law requiring warnings for listed substances; relevant to US retail programs. US retail compliance →
- CPSIA
- A US consumer product safety law covering substances such as lead and phthalates.
- ALCANZAR
- An EU regulation restricting hazardous substances in products.
- RoHS
- The Restriction of Hazardous Substances directive for materials and components.
- SMETA / Sedex
- A common social and ethical audit format (SMETA) and the platform (Sedex) used to share it.
Term You Don't See? Ask Us.
Our bilingual engineers answer spec and sourcing questions within 24 hours, 24/7.
English 
Español 
Français 
Deutsch 
Português