IV Pole Manufacturer
Xingyong manufactures aluminum IV poles and drip-stand hardware for medical-equipment brands and distributors — pole, hooks and base interfaces from one audited factory.
- 2-section telescoping, anti-creep locks — sized to the load rating your device drawing states.
- Drops into your base standard — crowns, casters and base interfaces machined to the fleet you already run.
- Audited hardware supply — ISO 9001 + IATF 16949 systems with batch traceability behind every lot.
What an IV Pole Has to Do — and What Buyers Should Spec
An IV pole — drip stand — holds infusion bags and pumps at treatment height beside a bed or chair.
Two failures drive nurse complaints: height locks that creep under load mid-infusion, and finishes that pit under daily ward disinfection.
Xingyong supplies the aluminum hardware layer — telescoping pole, machined hook crowns, lock assemblies and base interfaces — manufactured to your drawing. Device registration and certification remain with your brand; we build the metal that has to not fail.
Fleet buyers replace in cycles, so consistency is the spec: the same eloxiertes Aluminiumrohr lot behavior, batch after batch — the material discipline bodies like the Aluminiumverband standardize.
Jiangsu Xingyong Aluminum Technology Co., Ltd — the factory behind poolpole.com — machines, anodizes and assembles IV pole hardware for medical-equipment brands and distributors on audited systems.
IV Pole OEM Options — What You Can Spec, Line by Line
Every hardware line is set to your drawing before sampling. One factory machines, finishes and assembles it — one audit trail your regulatory file can actually cite.
| Spezifikation | OEM-Optionen | Vor der Probenahme bestätigen |
|---|---|---|
| Pole | Telescoping aluminum, 2-section typical | Height range needed |
| Sperren | Twist or clamp, anti-creep sized | Load rating target |
| Hook crown | Machined 2 or 4 hook | Bag and pump count |
| Base interface | To your base or caster spec | Base standard |
| Beenden | Anodized, disinfectant-ready | Ward chemical list |
| Plastic parts & assembly (in-house) | Knobs and caps molded on site; poles shipped assembled, ready for your kit box | Assembly level: bare, part-fitted, or retail-ready |
| Verpackung | Bulk or boxed, private label | Barcode und Einleger |
| Mindestbestellmenge und Lieferzeit | Pro Konfiguration; Probenahme alle 25–35 Tage | Bände und Daten |
IV Pole Hardware Builds for How Your Device Line Sells
Device brands rarely lose tenders on the pole — they lose them on hardware inconsistency across lots. Three hardware builds below, one audited aluminum platform.
IV Pole With Wheels
Pole-and-crown hardware built to mate your caster base, locks sized so height holds over a full shift.
IV Pole Stand
Fixed and clamp-on stand hardware for clinics and home-care lines, light enough to move bedside.
Medical IV Pole
The device-brand program: hardware to your drawing, audited systems and traceable batches behind it.
Hardware specs reflect anodized telescoping poles from Jiangsu Xingyong (ISO 9001 + IATF 16949, since 2010); load checks per configuration.
Anodized Aluminum vs Chromed Steel vs Stainless IV Poles
Chromed steel is the false economy of this category — chrome pits, then rusts, then gets replaced. Anodized aluminum holds fleets at volume pricing; stainless earns its premium where budgets allow.
| Point | Eloxiertes Aluminium | Chromed steel | Stainless steel |
|---|---|---|---|
| Weight at bedside | Light to reposition | Schwer | Schwer |
| Daily disinfection | Anodized layer holds | Chrome pits over time | Exzellent |
| Korrosion | Keiner | Rust at every pit | Keiner |
| Cost base | Volume-friendly | Low, short-lived | Prämie |
| Fleet economics | Long cycles at volume price | Replacement churn | Long cycles at a premium |
Why Medical Equipment Brands Choose Xingyong for IV Pole Hardware
IV pole hardware is bought by device brands and med-equipment distributors — this page answers the hardware layer; device certification stays with your brand. See how Xingyong works with brands and distributors.
Locks and Crowns Engineered for Loaded Shifts
- Anti-creep lock sizing under bag and pump loads.
- Machined hook crowns, deburred for ward use.
- Für Händler: care equipment reorders on fleet cycles — hardware consistency wins the renewal.
Hardware to Your Drawing, Systems Behind It
- Built to your device drawing and base standard.
- ISO 9001 + IATF 16949 quality systems, batch traceability.
- Für Händler: private-label packaging, MOQ and regional terms on our partner page.
The Factory That Machines and Finishes Your Hardware
- In-house extrusion, CNC and anodizing.
- Load and lock checks per batch.
- Direct factory in Jiangsu since 2010.
ISO 9001 + IATF 16949 — Send a Drawing for Free Samples
- ISO 9001/14001/45001/50001 and IATF 16949; amfori BSCI A-rated.
- Traceable lots for regulated buyers.
- Send height range, load and base spec for samples.
Claims map to anodized hardware from Jiangsu Xingyong (ISO 9001 + IATF 16949, since 2010); device certification remains the brand's scope.
Case Studies From the Same Line as Your IV Hardware
Medical buyers audit before they order, so shipped evidence beats claims. The three programs below document tooling, finish and volume discipline on record.
Häufig gestellte Fragen
Written for device-brand engineers, fleet purchasers and med-equipment distributors — not for clinics buying single stands. The boundary is stated plainly: we supply hardware; device certification stays with your brand.
Do you supply certified medical devices?
No — we supply the aluminum hardware layer: pole, crown and locks, built under ISO 9001 and IATF 16949 with traceable batches. Device registration and certification remain with your brand.
Poles that creep down mid-infusion drive nurse complaints — how is that prevented?
Locks are sized against the loaded weight of bags and pumps, not just the pole; anti-creep hold is checked per batch before packing.
Ward disinfectants destroy some finishes — what survives?
Anodizing: an oxide layer grown into the metal, not a coating that wipes thin. Send your ward chemical list and we confirm compatibility.
Can the pole drop into our existing caster base?
Yes — the base interface is machined to your base or caster standard so the pole joins your current assembly without rework.
Fleet buyers replace in cycles — can batches stay consistent?
Batch traceability covers tube lots and hardware, so a pole bought in year three matches year one — the consistency fleet renewals hinge on.
How is OEM IV pole hardware priced?
By height range, crown type and finish, against your drawing — factory-direct quotes within 24 hours.
Technical Guides for IV Pole Hardware Buyers
Hardware specs written wrong show up as ward complaints and audit findings. These three reads cover the material, strength and locking questions device engineers settle before a drawing freezes.
Was ist eloxiertes Aluminium?
The finish science behind disinfectant-ready — background for regulatory and spec files.
Ist Aluminium stark genug?
Strength numbers for light hardware — the data behind aluminum at the bedside.
Teleskopstangen-Verriegelungsführung
Lock engineering in detail — why a loaded pole holds height or creeps.
Start Your IV Pole Project
Send height range, load, crown and base spec — we quote hardware within 24 hours.
English 
Español 
Français 
Deutsch 
Português