Trava giratória
Rotate inner section - cam expands to grip outer tube. Premium feel, infinite length adjustment, no protruding hardware. Best for pool cleaning poles, dusting extensions, paint rollers.
Capabilities
Plastic Lock & Connector Matching for Aluminum Telescopic Poles
Many telescopic pole problems come from poor fit between the aluminum tube and plastic locking parts. Xingyong matches aluminum tubes with twist locks, flip locks, button locks, handles, end caps, and tool connectors in-house - improving assembly consistency and removing the cross-supplier QC gap.
3Lock Mechanisms In-Stock
4Connector & Fitting Types
100%In-House Plastic Injection
1Site - Tube + Lock + Assembly
Why Fit Matters
Tube and Lock Are One Sliding System
A twist or flip lock is rated for a specific tube OD-and-wall combination. Mismatch by 0.2 mm and the lock either slips under load or won't release for retraction. Customers who buy extruded tube from one factory and plastic locks from another often discover this only after first-container QC fails.
Xingyong injection-molds the lock body, cam, and friction sleeve on the same Jiangsu site as the tube. Each tube section is paired with its matched lock and stop before assembly - sliding force checked against the spec curve so every finished pole locks with the same feel.
Pre-paired sets ship as complete telescopic assemblies, not loose components. See 7-step manufacturing for where assembly fits in the pipeline.
Three Lock Mechanisms - Pick by Use Case
Trava de alavanca
Lever cam clamps the outer sleeve onto the inner tube. Fastest deploy, visible lock-state indication. Best for snow rakes, hiking poles, photography monopods.
Push-Button Lock
Spring-loaded button engages drilled holes in the outer tube at fixed lengths. Lowest cost, most positive engagement, no creep under load. Best for fixed-length presets and budget tiers.
Beyond Locks
Handles, End Caps & Tool Connectors - Also In-House
A pool pole isn't just tube + lock. The customer touches the handle, the floor sees the end cap, and the tool head clips into the connector. Mismatch at any of these three points and the product feels cheap - regardless of how precise the tube is.
Xingyong injection-molds and pre-pairs all of these:
- Overmolded grips and D-handles - matched to tube OD with rubber overmold options
- End caps and floor plugs - sized to tube ID, sealed against pool chemicals
- Universal tool connectors - the Acme thread / V-clip / Euro standards your tools use
- Internal stops and shock dampers - prevent over-extension and protect the lock
Conjunto
Why In-House Pairing Removes the Most Common Defect
The single most common poste de piscina defect from extrusion-only suppliers: "the lock won't bite" ou "the pole rattles". Root cause is almost always a tube/lock mismatch that nobody caught because tube and lock came from two factories without a single sign-off station.
At Xingyong, every pole goes through a paired-assembly sliding-force check before packing. The spec curve catches loose, tight, or inconsistent locks before they ever hit the carton. Lot-level results are filed and available on request.
Custom lock structures (hidden-cam, magnetic, threaded) follow the same in-house pairing flow - see custom spec tooling.
Lock & Connector Matching - FAQ
Do you stock standard tube + lock pairs or build to spec?
Both. Standard pool pole sizes (most common ODs) have stock twist / flip / button locks pre-paired and ready. Custom tube ODs or specialty locks build to spec - DFM in 3-5 days, sample in 7-10 days, mass production after sign-off.Which lock mechanism is best for pool cleaning poles?
Twist lock is the dominant choice for pool cleaning poles - premium feel, no protruding hardware to catch on the pool wall, infinite length adjustment. Flip lock for faster deploy, push-button for fixed-length budget tiers.Can you supply just the plastic locks without aluminum tubes?
Yes, but lower MOQ flexibility and we strongly recommend the paired-set option. Locks shipped without their matched tube lose the assembly QC step that prevents the rattle / slip defect.What tool connector standards do you support?
Common Acme thread (US pool pole standard), V-clip (EU pool pole), Euro-thread, snap-clip, and custom geometries. Send your tool head sample or drawing and we'll match.Are the lock plastics pool-chemical resistant?
Yes - we use polypropylene, nylon (glass-filled for stress parts), and POM grades chosen for chlorine and bromine resistance. UV-stabilized grades available for poles that live outdoors year-round.What's the lead time for custom-spec locks?
Tooling: 15-25 days for new injection mold. Sample: 7-10 days after mold trial. Production: 30-40 days for first bulk run. See production lead time for full timeline.Stop Sourcing Tube and Lock Separately
Send your tube spec + lock preference - paired-assembly quote in 24 hours, matched sample in 7-10 days.